Other mount / accessories Updated on: 31 Mar 2020
RainbowAstro telescope mount
RST-135 (polar alignment part improvement) . . . HK$29,950 (accepting order 接受订货)
- Strain Wave gear, equatorial / Alt-Az dual mount
- Weight 3.3kg, 12-16VDC power input
- 13.5kg payload without counterweight, 18kg with counterweight
- Built-in WiFi, GPS and home sensor
- Including soft case, hand controller, 3/8" tripod adapter and PoleMaster adapter
RST-400 . . . HK$53,900 (accepting order 接受订货)
- Weight 24kg, 12-16VDC power input
- 40kg payload
- Built-in WiFi, GPS and home sensor
- Including hard case, hand controller and PoleMaster adapter
Miyauchi EXLD-42, 8x42 ED binocular . . . HK$1,890 (in stock 現貨)
Miyauchi EXLD-42, 10x42 ED binocular . . . HK$1,990 (in stock 現貨)
- Excellent optics quality
- Including belt and carry bag
- Made in Japan
Track The Star, TTS-160 Panther Alt-Az mount system
* Shared shipping cost from factory to Hong Kong not included, actual depends on how many items you need
* Price subjected to change due to fluctuation of Euro exchange rate
- TTS160A. Panther Mountuig head . . . HK$28,450 (accepting order 接受订货)
- TTS160B. Panther Topmount, Arm . . . HK$3,650 (accepting order 接受订货)
- TTS160C. Panther Counterweight 4kg x2 . . . HK$1,890 (accepting order 接受订货)
- TTS160D. Panther Counterweight 8kg x2 . . . HK$3,040 (accepting order 接受订货)
- TTS160F, Panther Mini Pier . . . HK$2,460 (accepting order 接受订货)
- TTS160G, Panther Telescope Rotator . . . HK$8,500 (accepting order 接受订货)
- TTS160H, Panther Side Mount dovetail saddle . . . HK$1,600 (accepting order 接受订货)
- TTS160J, Panther Folding Pier . . . HK$6,920 (accepting order 接受订货)
- TTS160K, Panther Pier adapter . . . HK$1,510 (accepting order 接受订货)
- TTS160Q, Panther Pier extension (200mm) . . . HK$1,510 (accepting order 接受订货)
- TTS300A Mammoth Mounting head . . . HK$109,200 (accepting order 接受订货)
- Made in Denmark
Lunatic Seletek Armadillo 2 controller . . . HK$1,990 (in stock 現貨)
- Focusing, rotating and filter wheel managing, up to two motors at the same time
- Work with FocusMax, MaximDL, CCDCommander, ACP, CCD AutoPilot and any ASCOM aware astronomy software
- Robofocus motor compatible
Solar viewing shade . . . HK$10 (in stock 現貨)
- Made in USA
Lodestar/Superstar autoguide cable . . . HK$80 (in stock 現貨)
- One piece cable, no inter-connection
- Please specify model of EQ mount
Takahashi T2M autoguide cable . . . HK$90 (in stock 現貨)
- For new Takahashi EM11/200/400 T2M EQ mounts autoguide port
- 5 core cable for RA+, RA-, DEC+, DEC- control
- Please specify model of guider
- Cable length up to your choice (maximum 82")
Spacers for T2 thread / Borg system
- To optimize the image quality while using reducer/flattener
- Two diameter sizes:
* 42mm inner diameter, 60mm outer diameter
* 50mm inner diameter, 58mm outer diameter
0.5mm thick (stainless steel) . . . HK$29 (in stock 現貨)
1.0mm thick (anodized aluminum) . . . HK$29 (in stock 現貨)
2.0mm thick (anodized aluminum) . . . HK$29 (in stock 現貨)
Green laser pointer . . . HK$80 (in stock 現貨)
Lumicon Deep Sky filter (1.25") . . . HK$780 (in stock 現貨)
Stainless steel counterweight
- Outer diameter 80mm
- Plastic insert lock screw end, prevents shaft from scratching
- Ø18mm bore hole, can be enlarged to bigger sizes upon request
* 1kg . . . HK$310 (in stock 現貨)
* 1.5kg . . . HK$350 (in stock 現貨)
* 2kg . . . HK$390 (in stock 現貨)
Pair type tube rings (inner diameter upon your choice)
- Machined from 1/2" thick solid 6061 grade aluminum (or other thicknesses for larger sizes)
- Stainless steel hinge/nut/stud
- 1mm thick felt inner surface, protect OTA tube
- Five M6 mounting holes: center, 60mm & 80mm apart (other locations/thread sizes upon request)
- 90mm bottom & top width (other widths upon request)
- Bottom and top platform plates also available (length upon your choice)
- Black Delrin material thumb knob not shown in photo
SBIG CCD camera lens adapters
EOS lens to SBIG STL11000 adapter . . HK$290 (in stock 現貨)
- Directly install on STL housing (need to remove front accessory plate)
- #6-32 mounting screws included
EOS lens to SBIG ST-8300 adapter (used with FW5/FW8 filter wheel in place) . . HK$590 (in stock 現貨)
QHY8 adapters
Baader MPCC to QHY8 (M42 x 0.75) adapter (back focus matched)
(HK$50) (in stock 現貨)
Can be used as M42 x 0.75 extension tube
2" outer diameter, can also be used as 2" nose piece for T2 ocular
EOS / Nikon lens to QHY CCD adapter (back focus matched) . . . HK$280
Extension tubes (special price: HK$30 per set) (in stock 現貨)
- Black anodized aluminum, 3 pieces per set (7mm, 14mm and 28mm)
- Available sizes: M57 x 0.75 and M60 x 0.75 (fit for Borg / Vixen system)
2" nose piece to EOS or Nikon body adapter . . . HK$180 (in stock 現貨)
Large image circle
With M48 thread for 2" filter
2" nose piece to T2 (M42 x 0.75) adapter . . . HK$90 (in stock 現貨)
- With M48 thread for 2" filter
Control cables
Autoguide cables: Takahashi / Vixen SS2K / QHY / SBIG / StarlightXpress . . . HK$80
Takahashi Temma RS232 (GOTO) cable . . . HK$80
Takahashi Temma 2M autoguide cable . . . HK$90
Prices subjected to change without notice
